Choosing the correct height of countertop surfaces is an important part of designing a comfortable and functional kitchen. A countertop that is too low can cause unnecessary bending, while one that is too high may make food preparation, cooking and cleaning uncomfortable. The right height should support your daily activities, complement your cabinetry and accommodate the people who use the kitchen most often.
In most North American homes, the standard kitchen countertop height is approximately 36 inches (914 mm) from the finished floor to the top of the countertop. However, this measurement is not a universal requirement. The ideal height can vary depending on your height, cabinet construction, countertop material, appliance dimensions and personal preferences.
For homeowners planning a kitchen renovation in Kitchener, Waterloo, Cambridge or Guelph, understanding these measurements before selecting a countertop can help prevent installation problems and improve long-term comfort.
Whether you are considering quartz, granite or another stone surface, this guide explains standard countertop heights, how finished measurements are calculated, how to choose the right working height and what to consider before professional installation.
What Is the Standard Height of a Countertop?
The standard height of a kitchen countertop is approximately 36 inches (914 mm or 91.4 cm), measured vertically from the finished floor to the upper surface of the countertop.
This measurement is widely used in North American kitchen designs because it provides a practical working surface for many adults. It also works with common cabinet configurations and helps accommodate standard kitchen appliances.
A typical kitchen countertop height consists of two main components:
- Base cabinet height: Approximately 34.5 inches (876 mm).
- Countertop and supporting buildup: Approximately 1.5 inches (38 mm).
Together, these components produce a finished countertop height of approximately 36 inches.
However, the final measurement depends on the actual countertop thickness and whether additional support or substrate material is installed underneath.
Standard Countertop Height in Inches and Millimetres
For Canadian homeowners, understanding both imperial and metric measurements is useful when working with countertop suppliers, cabinet manufacturers and renovation contractors.
| Countertop measurement | Standard height | Metric equivalent |
| Kitchen countertop | 36 inches | 914 mm |
| Lowered kitchen work surface | 34 inches | 864 mm |
| Raised kitchen work surface | 38 inches | 965 mm |
| Kitchen bar counter | 42 inches | 1,067 mm |
| Kitchen island preparation surface | 36 inches | 914 mm |
| Traditional bathroom vanity | 30–32 inches | 762–813 mm |
| Comfort-height bathroom vanity | 34–36 inches | 864–914 mm |
| Laundry countertop | 36 inches | 914 mm |
| Table-height work surface | 28–30 inches | 711–762 mm |
These are general planning references rather than mandatory dimensions. Custom cabinetry and individual requirements may justify different measurements.
Why Is 36 Inches the Standard Kitchen Countertop Height?
The 36-inch countertop height has become a common North American kitchen measurement because it offers a practical balance between comfort, cabinet dimensions and appliance compatibility.
Kitchen countertops are used for several everyday activities, including chopping vegetables, preparing meals, washing dishes, placing small appliances and organizing food.
A working surface that is appropriately positioned allows people to perform these activities without constantly bending forward or lifting their shoulders.
There are three important reasons why 36 inches is widely used.
1. Comfortable Working Position
A countertop should allow your arms to work naturally while your shoulders remain relaxed.
For many adults, a surface around 36 inches provides a reasonable starting point. However, the ideal working height depends on the individual’s elbow height and the activity being performed.
2. Compatibility With Kitchen Cabinets
Standard base cabinets are commonly manufactured around 34.5 inches high, with the countertop and supporting structure completing the finished measurement.
This makes it easier to plan cabinetry, countertops and other kitchen components together.
3. Compatibility With Kitchen Appliances
Dishwashers, ranges and other kitchen appliances are designed around common cabinet and countertop dimensions.
Maintaining a conventional finished height can simplify appliance installation and reduce the likelihood of clearance problems.
Nevertheless, homeowners should always check the manufacturer’s installation specifications before changing cabinet or countertop dimensions.
How Is Countertop Height Calculated?
One of the most important things to understand when planning a countertop installation is that the finished height is not determined by the stone slab alone.
It is calculated by combining the height of the supporting cabinetry, any additional supporting materials and the countertop itself.
The general calculation is:
Finished Countertop Height = Base Cabinet Height + Substrate or Support Height + Countertop Thickness
For example:
| Component | Measurement |
| Base cabinet | 34.5 inches |
| Supporting material | 0 inches |
| Quartz countertop | 1.18 inches |
| Finished height | 35.68 inches |
This example demonstrates why a countertop can be described as approximately 36 inches high even when its precise finished measurement is slightly below 36 inches.
The following components should be considered before selecting a countertop.
Base Cabinet Height
The base cabinet supports the countertop and provides the foundation for the entire working surface.
A common North American base cabinet configuration is approximately 34.5 inches high, including the toe kick.
However, custom cabinetry can have different dimensions depending on the kitchen layout and homeowner requirements.
Before ordering a countertop, confirm the actual cabinet height rather than assuming it matches a standard measurement.
Toe Kick Height
The toe kick is the recessed section at the bottom of a kitchen cabinet.
It provides space for your feet when standing close to the countertop, allowing you to work without constantly leaning forward.
Typical toe kick dimensions vary by cabinet manufacturer and design. A common configuration uses approximately 3.5 to 4 inches of toe kick height.
The toe kick is generally included in the overall base cabinet measurement. It should not be added a second time when calculating finished countertop height.
Countertop Thickness
Countertop thickness directly affects the final height of the kitchen working surface.
Different materials are available in different thicknesses, and the installation method can change the total buildup.
For example:
- A 2 cm stone slab is approximately 0.79 inches thick.
- A 3 cm stone slab is approximately 1.18 inches thick.
- A 4 cm stone slab is approximately 1.57 inches thick.
Some installations use plywood or another supporting substrate underneath thinner stone slabs. In other installations, thicker material may be installed directly on properly prepared cabinets.
The visible edge thickness can also differ from the actual thickness of the stone because of laminated or built-up edge profiles.
Always confirm the complete installation specification before calculating the finished height.
Ideal Countertop Height Based on Your Height
Although 36 inches is a widely accepted standard, it may not be the most comfortable working height for every homeowner.
Someone who is considerably taller may find a standard countertop too low, while a shorter individual may need to reach upward during everyday kitchen activities.
A useful starting point is to measure your standing elbow height and consider a working surface approximately 2 to 4 inches below your elbows. The appropriate distance can vary depending on the task.
The following table provides illustrative planning ranges rather than fixed ergonomic standards.
| User height | Suggested countertop height to evaluate |
| 5 feet 0 inches (152 cm) | 32–34 inches |
| 5 feet 2 inches (157 cm) | 33–35 inches |
| 5 feet 4 inches (163 cm) | 34–36 inches |
| 5 feet 6 inches (168 cm) | 35–37 inches |
| 5 feet 8 inches (173 cm) | 36–38 inches |
| 5 feet 10 inches (178 cm) | 37–39 inches |
| 6 feet 0 inches (183 cm) | 38–40 inches |
| 6 feet 2 inches (188 cm) | 39–41 inches |
These ranges are starting points for testing. They should not replace an individual ergonomic assessment or an actual trial of the proposed working height.
Countertop Height for Shorter People
A standard 36-inch countertop may feel uncomfortable for someone with a shorter stature.
During food preparation, a high surface can make it harder to apply downward pressure when chopping, mixing or rolling dough.
Possible solutions include:
- Installing a slightly lower preparation surface.
- Customizing selected cabinet sections.
- Creating a lower island work area.
- Using a pull-out preparation board.
- Providing multiple countertop heights for different activities.
A customized work surface can make a kitchen more comfortable without requiring every countertop to be installed at the same height.
Countertop Height for Taller People
Taller homeowners may experience discomfort when working on a standard 36-inch countertop for extended periods.
Repeatedly leaning forward can make food preparation less comfortable.
Potential solutions include:
- Raising the base cabinets.
- Selecting a custom cabinet configuration.
- Adjusting the countertop support structure.
- Installing a raised preparation area.
- Creating different working heights for different kitchen tasks.
However, increasing countertop height requires careful appliance and cabinet planning.
Countertop Height for Families With Different Heights
When several people use the same kitchen, choosing one perfect height can be difficult.
A practical option is to use different working zones.
For example, the main countertop can remain at 36 inches while a separate section is lowered for baking, seated preparation or shorter family members.
This approach can provide greater flexibility without compromising the overall kitchen design.
How to Measure the Correct Countertop Height
Measuring countertop height correctly is essential when replacing an existing surface or planning a new kitchen.
A small measurement error can affect appliance positioning, cabinet alignment and the final installation.
Follow these steps when checking your existing or proposed countertop height.
Step 1: Identify the Finished Floor Level
Start by identifying the final floor surface from which the countertop height will be measured.
If new flooring is being installed, account for its thickness before finalizing cabinet and countertop dimensions.
For example, if new flooring raises the floor by half an inch, the relationship between the floor and the countertop will change unless the cabinetry is adjusted accordingly.
Step 2: Measure the Base Cabinet
Measure vertically from the finished floor to the top of the cabinet structure.
Do not assume that every cabinet has the same height.
Older homes, custom kitchens and replacement cabinetry may use different dimensions.
Step 3: Check the Supporting Material
Determine whether plywood, a substrate, support rails or another material will sit between the cabinet and countertop.
Include its actual thickness in your calculation.
Step 4: Confirm the Countertop Thickness
Check the specifications of your selected material.
Quartz, granite, marble and porcelain products may have different thickness options and support requirements.
Step 5: Calculate the Final Height
Add the cabinet height, support buildup and actual countertop thickness.
This gives you the proposed finished height.
Step 6: Check Appliance Clearance
Before finalizing the measurement, confirm that the dishwasher, range, refrigerator and other appliances will fit correctly.
Also check window sills, backsplashes, electrical outlets and existing wall cabinets.
For stone countertops, professional templating and final measurements should be completed before fabrication.
Countertop Height by Material: Quartz, Granite and Other Surfaces
Different countertop materials have different thickness options, installation requirements and visual characteristics.
The material you select can therefore influence the final countertop height.
Quartz Countertop Height
Quartz countertops are popular in modern kitchens because they offer a wide selection of colours, patterns and finishes.
Common engineered quartz slab thicknesses include approximately 2 cm and 3 cm.
A 3 cm quartz countertop is approximately 1.18 inches thick. When installed directly on a 34.5-inch cabinet, the finished height is approximately 35.68 inches.
Thinner quartz may require additional support, depending on the product and manufacturer’s specifications.
Homeowners considering quartz should evaluate the following:
- Actual slab thickness.
- Cabinet support requirements.
- Edge profile.
- Backsplash design.
- Sink and cooktop cutouts.
- Finished countertop height.
Explore Cava Granite’s quartz countertops to learn more about available quartz surfaces and countertop options in Kitchener, Waterloo, Cambridge and Guelph.
Granite Countertop Height
Granite is a natural stone that offers distinctive patterns, colours and variations.
Like quartz, granite countertops are commonly available in 2 cm and 3 cm thicknesses, although availability depends on the specific slab and supplier.
A 3 cm granite countertop installed directly on a 34.5-inch cabinet produces a finished height of approximately 35.68 inches.
Thinner granite may require an appropriate supporting structure.
When choosing granite, consider:
- Slab thickness.
- Stone weight.
- Cabinet strength.
- Edge detailing.
- Sink cutout requirements.
- Installation support.
Because granite is a natural material, individual slabs can have different characteristics.
Discover granite countertop options from Cava Granite when planning a custom kitchen renovation.
Marble Countertop Height
Marble countertops are appreciated for their natural veining and elegant appearance.
Marble thickness can vary depending on the product and fabrication requirements.
A common thickness is approximately 3 cm, but the final installation specification should always be confirmed.
When planning marble countertops, consider the finished surface height, cabinet support, edge profile and the material’s maintenance requirements.
Porcelain Countertop Height
Porcelain countertops can be manufactured in relatively thin slab formats, including products around 12 mm thick.
However, a thinner porcelain slab should not automatically be installed using the same support method as a thicker stone countertop.
The required substrate and structural support depend on the manufacturer’s specifications and the intended application.
This is particularly important when planning islands, cantilevered sections and areas containing sink or cooktop cutouts.
Countertop Material Thickness Comparison
| Material | Example thickness | Approximate thickness in inches |
| Quartz | 20 mm | 0.79 inches |
| Quartz | 30 mm | 1.18 inches |
| Granite | 20 mm | 0.79 inches |
| Granite | 30 mm | 1.18 inches |
| Marble | 20 mm | 0.79 inches |
| Marble | 30 mm | 1.18 inches |
| Porcelain | 12 mm | 0.47 inches |
| Porcelain | 20 mm | 0.79 inches |
These are example product thicknesses, not universal specifications. Installation support and finished height must be calculated for the actual product.
Standard Kitchen Island Countertop Height
Kitchen islands have become an important feature in modern kitchen designs.
They provide additional preparation space, storage, seating and an area for family members to gather.
The standard working height of a kitchen island is approximately 36 inches, matching the main kitchen countertop.
However, islands designed for bar seating may use a higher surface.
Standard Kitchen Island Height
A 36-inch island provides a continuous working surface that aligns with conventional kitchen counters.
This is useful when the island is primarily intended for:
- Food preparation.
- Cooking assistance.
- Meal organization.
- Small appliance placement.
- Additional workspace.
A consistent height also creates a clean visual appearance.
Bar-Height Kitchen Island
A bar-height surface is commonly around 42 inches.
This raised configuration is designed for bar-height stools and can create a separate seating area.
However, a raised bar section should be planned carefully to provide comfortable seating and adequate support.
Countertop Overhang for Kitchen Island Seating
Overhang is the portion of the countertop that extends beyond the cabinet structure.
A standard cabinet-front overhang is much smaller than the overhang required for seating.
For a kitchen island with seating, approximately 12 to 18 inches of overhang may be considered, depending on the design and available knee space.
Larger stone overhangs may require brackets, corbels or another engineered support system.
The correct support depends on the material, slab thickness, overhang depth and manufacturer’s requirements.
Standard Bathroom Countertop Height
Bathroom countertops have different design requirements from kitchen countertops.
They are primarily used for washing hands, brushing teeth, grooming and other daily activities.
Traditional bathroom vanity heights often fall around 30 to 32 inches, while modern comfort-height vanities commonly range from 34 to 36 inches.
The ideal measurement depends on the sink design, plumbing configuration and the people using the bathroom.
Traditional Bathroom Vanity Height
Traditional bathroom vanities are often lower than kitchen countertops.
This configuration can work well in smaller bathrooms and homes with existing lower cabinetry.
However, some adults may find a lower vanity less comfortable during extended grooming activities.
Comfort-Height Bathroom Vanity
Comfort-height vanities are generally designed to reduce unnecessary bending.
A height of approximately 34 to 36 inches is commonly used in modern bathroom renovations.
The final measurement must account for the sink itself, including whether it is undermount, integrated or vessel-style.
For example, a vessel sink sits above the countertop and increases the total height at which the user interacts with the basin.
This is why the vanity cabinet and countertop should always be planned together.
Explore bathroom countertops from Cava Granite when planning a custom bathroom surface.
Countertop Height for Accessibility
Accessibility is an important consideration when designing a kitchen for individuals with different mobility requirements.
A standard 36-inch countertop may not be suitable for someone who uses a wheelchair or needs to prepare food while seated.
Accessible kitchen design considers more than countertop height alone.
It also takes into account:
- Knee clearance.
- Toe clearance.
- Clear floor space.
- Reach distances.
- Sink accessibility.
- Work surface depth.
- Appliance positioning.
The Canada Mortgage and Housing Corporation discusses traditional countertop heights of approximately 915 mm and identifies lower work surfaces as potentially more convenient for shorter individuals and people using wheelchairs.
Its accessible kitchen guidance also discusses work surfaces around 735–865 mm, depending on the user and configuration.
For an accessible residential kitchen, the specific requirements should be assessed against the applicable Canadian accessibility standards and the user’s needs.
The Canadian accessibility standard CSA/ASC B652:23 provides additional guidance for accessible dwellings, including countertop and workspace considerations.
It is important not to confuse American ADA requirements with Canadian accessibility requirements. The applicable rules depend on the project type, jurisdiction and building requirements.
For homeowners planning an accessible kitchen, consulting a qualified designer and contractor before cabinet fabrication is particularly important.
How Countertop Height Affects Kitchen Appliances
Countertop height is not only an aesthetic or ergonomic decision.
It also affects how appliances fit into the kitchen.
Changing the finished height without checking appliance dimensions can create expensive installation problems.
Dishwasher Clearance
Most built-in dishwashers are designed to fit within a specific installation opening.
If the countertop or cabinet configuration is too low, the dishwasher may not fit properly.
If the countertop is raised significantly, the dishwasher installation and surrounding cabinetry may require adjustments.
Always confirm the dishwasher manufacturer’s required opening dimensions.
Range and Cooktop Alignment
Ranges and slide-in appliances are designed around specific installation dimensions.
A countertop that is significantly higher or lower than the appliance surface can create an uneven transition.
Check the range’s installation specifications before finalizing the countertop height.
Kitchen Sink Position
The sink should be considered when determining the finished countertop height.
Sink type, basin depth, faucet design and installation method can all influence the final working position.
For example, a deeper sink combined with a standard countertop may require more bending during dishwashing.
Wall Cabinets and Backsplash Clearance
Raising or lowering the countertop can change the available space between the countertop and upper cabinets.
This can affect:
- Backsplash dimensions.
- Electrical outlet placement.
- Under-cabinet lighting.
- Range hood positioning.
- Small appliance clearance.
For a complete kitchen renovation, these measurements should be coordinated before fabrication and installation.
Common Countertop Height Mistakes to Avoid
Even a beautiful countertop can become inconvenient if its height has not been properly planned.
Here are some common mistakes homeowners should avoid.
1. Assuming 36 Inches Is Perfect for Everyone
The standard measurement is a starting point, not a universal ergonomic solution.
Consider the height of the primary kitchen users and the activities performed most frequently.
2. Ignoring Countertop Thickness
Different materials have different thicknesses.
Forgetting to include the actual countertop and substrate dimensions can result in an incorrect finished height.
3. Measuring Before Flooring Is Finalized
New flooring can change the finished floor level.
If this change is not included in the calculation, the final countertop height may differ from the intended measurement.
4. Forgetting Appliance Clearance
A countertop should not be ordered without confirming appliance dimensions and installation requirements.
5. Choosing Island Height Without Considering Seating
The countertop height, stool height, overhang and knee clearance should be planned together.
6. Making Last-Minute Cabinet Adjustments
Changing cabinet height after installation can be expensive and complicated.
The most efficient time to decide on custom countertop height is during the initial kitchen planning stage.
7. Confusing Edge Thickness With Actual Slab Thickness
A countertop with a thick-looking front edge may use a laminated edge profile.
The visible edge does not necessarily represent the thickness of the entire slab.
Always confirm the actual surface and support dimensions.
Should You Choose a Custom Countertop Height?
A custom countertop height can be a good option when standard dimensions do not suit your household or kitchen layout.
It is particularly useful when:
- The primary cook is significantly taller or shorter than average.
- Multiple family members have different ergonomic requirements.
- The kitchen includes a dedicated baking station.
- A section needs to accommodate seated preparation.
- The homeowner is designing a custom kitchen.
- The existing cabinetry uses non-standard dimensions.
However, custom heights require coordination between cabinet construction, countertop fabrication and appliance installation.
For example, a homeowner may choose a 38-inch main working surface and a lower 32-inch baking section.
This can provide greater flexibility, but the cabinet heights, supporting structure and stone transitions must all be planned correctly.
A professional fabricator can help evaluate whether the proposed dimensions are practical for the selected material.
Countertop Height Considerations for Ontario Homes
Homeowners renovating kitchens in Ontario should consider local home configurations, cabinet dimensions, appliance specifications and their preferred countertop materials.
Whether you live in Kitchener, Waterloo, Cambridge or Guelph, the same basic planning principles apply.
However, individual homes can have different cabinet configurations, floor levels and renovation requirements.
Kitchener, Ontario
For homeowners planning kitchen renovations in Kitchener, measuring existing cabinetry and checking appliance clearances are important first steps.
Older homes and renovated kitchens may have non-standard cabinet dimensions.
Waterloo, Ontario
Modern kitchen renovations in Waterloo often involve customized islands, larger preparation areas and premium countertop surfaces.
Planning the correct island and perimeter countertop heights together can create a more functional kitchen.
Cambridge, Ontario
When replacing countertops in Cambridge homes, it is important to check existing cabinet levels, finished flooring and backsplash alignment before fabrication.
These details can influence the final installation.
Guelph, Ontario
Homeowners in Guelph planning new kitchens or countertop replacements should consider their preferred working height, material thickness and appliance requirements before ordering custom stone surfaces.
The best approach is to assess the actual kitchen rather than relying entirely on standard measurements.
Why Professional Countertop Measurement and Installation Matter
Choosing the right countertop height is only one part of a successful kitchen renovation.
Accurate measurements, suitable material selection, proper fabrication and professional installation are equally important.
A professional countertop installation process typically involves:
- Reviewing the existing cabinet configuration.
- Confirming the desired finished countertop height.
- Checking the selected slab thickness.
- Assessing cabinet support and leveling.
- Measuring the countertop layout.
- Confirming sink, faucet and cooktop cutouts.
- Planning seams and edge profiles.
- Fabricating the countertop.
- Completing the installation and final checks.
At Cava Granite, homeowners can explore quartz, granite and other custom stone countertop options for kitchen and bathroom projects.
Cava Granite has operated under its current brand and ownership since April 2015 and serves homeowners in Kitchener, Waterloo, Cambridge, Guelph and surrounding areas.
The company provides countertop selection, precise measurement, fabrication and installation services to help homeowners achieve a finished surface that complements their kitchen design.
If you are planning a countertop replacement or a completely new kitchen, explore Cava Granite’s professional countertop installation services.
For projects requiring customized dimensions, custom stone countertops can provide greater flexibility in material selection, edge profiles and finished measurements.
Frequently Asked Questions About Countertop Height
What is the standard height of a kitchen countertop?
The standard kitchen countertop height in North America is approximately 36 inches (914 mm), measured from the finished floor to the top of the countertop. The actual height can vary depending on cabinet dimensions, countertop thickness and individual preferences.
How high should a countertop be in Canada?
A typical kitchen countertop in Canada is approximately 915 mm (36 inches) high. However, custom heights may be more comfortable depending on the user’s stature, accessibility needs and kitchen design.
Is 36 inches the correct height for every kitchen?
No. Although 36 inches is a common standard, it may not suit everyone. Shorter homeowners, taller individuals and people with mobility requirements may benefit from customized countertop heights.
What is the standard kitchen countertop height in millimetres?
The standard kitchen countertop height is approximately 914 mm or 915 mm, depending on rounding.
How tall are standard kitchen base cabinets?
A common North American base cabinet configuration is approximately 34.5 inches (876 mm), including the toe kick. The countertop and any supporting material are added to determine the finished height.
Does quartz countertop thickness affect the finished height?
Yes. Quartz countertops are commonly available in 2 cm and 3 cm thicknesses. The actual thickness, supporting material and cabinet height determine the final countertop measurement.
What is the standard height of a kitchen island?
A kitchen island used for food preparation is commonly 36 inches (914 mm) high. An island with a raised bar section is often approximately 42 inches (1,067 mm).
What is the standard height of a bathroom countertop?
Traditional bathroom vanity heights are commonly around 30 to 32 inches, while modern comfort-height vanities often range from 34 to 36 inches.
What countertop height is best for a tall person?
A taller person may find a countertop between 38 and 40 inches more comfortable, but the ideal measurement depends on elbow height, posture and the type of work being performed.
What countertop height is best for a shorter person?
A countertop around 32 to 34 inches may be worth evaluating for a shorter person. However, an actual ergonomic assessment is preferable to selecting a height based only on overall body height.
How much space should be between the countertop and upper cabinets?
A common planning measurement is approximately 18 inches between the countertop and the bottom of standard upper cabinets. The appropriate clearance depends on cabinet design, appliances, range hood requirements and the manufacturer’s specifications.
Can countertop height be changed without replacing cabinets?
Sometimes. Adjustments may be possible through cabinet modifications, support structures or other installation changes. However, lowering an existing countertop can be more difficult, and appliance compatibility must be checked before making changes.
Does countertop overhang affect countertop height?
No. Overhang changes how far the countertop extends beyond the cabinet structure, not its vertical height. However, larger overhangs can require additional structural support.
Should the countertop height be measured before or after flooring installation?
The final height should be calculated using the finished floor level. If flooring is being installed after cabinetry, its thickness must be included in the planning calculations.
What is the best countertop height for wheelchair accessibility?
There is no single suitable height for every wheelchair user. Canadian accessible-design guidance considers the user’s reach, knee clearance, toe clearance, working space and the specific kitchen configuration. A qualified accessibility professional should assess the design against applicable Canadian requirements.
Does changing countertop height affect dishwasher installation?
Yes. Changing the countertop or cabinet height can affect the available dishwasher opening. Always check the appliance manufacturer’s installation dimensions before modifying the kitchen layout.
Choosing the Right Height of Countertop
The standard height of countertop surfaces in North American kitchens is approximately 36 inches (914 mm), but the best measurement for your home depends on more than a standard industry dimension.
Your height, daily kitchen activities, cabinet configuration, countertop thickness, flooring and appliance requirements all influence the final result.
Whether you are selecting quartz, granite, marble or another surface, planning the correct height before fabrication can help prevent costly adjustments and create a more comfortable kitchen.
For homeowners in Kitchener, Waterloo, Cambridge and Guelph, Cava Granite offers countertop selection, fabrication and installation services for customized kitchen and bathroom projects.
Planning a new countertop or kitchen renovation? Contact Cava Granite to discuss your preferred countertop material, dimensions and installation requirements.
